KC-46 Vertical Bandsaw
Agency: | DEPT OF DEFENSE |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159552176386303 |
Posted Date: | Jan 13, 2023 |
Due Date: | Jan 19, 2023 |
Solicitation No: | FA8125-23-Q-0043 |
Source: | https://sam.gov/opp/1a34d0cf42... |
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Presolicitation (Original)
- All Dates/Times are: (UTC-06:00) CENTRAL STANDARD TIME, CHICAGO, USA
- Original Published Date: Jan 13, 2023 02:36 pm CST
- Original Response Date: Jan 19, 2023 10:00 am CST
- Inactive Policy: 15 days after response date
- Original Inactive Date:
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 3405 - SAWS AND FILING MACHINES
-
NAICS Code:
- 332216 - Saw Blade and Handtool Manufacturing
-
Place of Performance:
Tinker AFB , OK 73145USA
The Air Force intends to solicit the following supply:
The 76th AMXG requests the purchase of one (1) each Composite Vertical Bandsaw.
The requested item descriptions/specifications are outlined below.
a. One (1) Composite Vertical Bandsaw
1) Shall have a minimum 10-foot power cord and plug with a 208V/30A/3-phase power requirements.
2) Shall have variable cutting speeds capable of a minimum of 40 Surface Feet Per Minute (SFPM) to a maximum of at least 5000 SFPM and controls
3) Throat capacity: at least 24"
4) Cutting Height Capacity: 12”-14”
5) Blade width: 1/8"-1"
6) Table Height from Floor: 40"-46”
7) Footprint maximum: 72” L x 36” W x 84” H
8) Table Tilt (deg.) maximum: At least 10 on Left. 45 on Right
9) Table size minimum: 14” x 14”
10) Shall include standard miter gauge
11) Shall include Blade Guard and Tension control device IAW OSHA 1910.213
12) Shall include Work Light
13) Shall include Blade Speed readout in SFPM
14) Shall include Emergency Stop Button, Blade Start Button, and Blade Stop Button
15) Shall include Vacuum for removal of dust
16) Shall include compatible 60-80 grit Continuous Diamond Edge, or 70-100 grit Continuous Remington Tungsten Carbide Band Saw Blade
17) Shall be delivered fully assembled
A Firm Fixed Price type contract is contemplated.
Estimated Period of Performance: 30 days ARO
This is a small business set-aside
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 332216 with a size standard of 750 EMP.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
For further information contact:
Jennie Hendrix
Contracting Specialist
Jennie.hendrix.1@us.af.mil
- CP 405 734 9107 3001 STAFF DR STE 2S76
- TINKER AFB , OK 73145-3303
- USA
- Jennie Hendrix
- jennie.hendrix.1@us.af.mil
- Sheridan Robison
- sheridan.robison@us.af.mil
- Jan 13, 2023 02:36 pm CSTPresolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.