Composite Vertical Bandsaw
| Agency: | |
|---|---|
| Level of Government: | Federal |
| Category: |
|
| Opps ID: | NBD00159090237479269 |
| Posted Date: | Feb 14, 2024 |
| Due Date: | Feb 16, 2023 |
| Source: | https://sam.gov/opp/82d184efda... |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Presolicitation (Original)
- All Dates/Times are: (UTC-06:00) CENTRAL STANDARD TIME, CHICAGO, USA
- Original Published Date: Feb 14, 2024 01:35 pm CST
- Original Response Date: Feb 16, 2023 12:00 pm CST
- Inactive Policy: 15 days after response date
- Original Inactive Date: Mar 03, 2023
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 3405 - SAWS AND FILING MACHINES
-
NAICS Code:
- 332216 - Saw Blade and Handtool Manufacturing
-
Place of Performance:
Tinker AFB , OK 73145USA
The Air Force intends to solicit the following supply:
The 76 AMXG/568 AMXS is requesting utilization of funds for the purchase of a vertical bandsaw.
The requested equipment item descriptions/specifications are Brand Name or equal to a DoALL Model 2013-V3 bandsaw. The requirements to be considered equal are outlined below.
a. Item Number 1 – One (1) DoALL Brand Model 2013-V3 Composite Vertical Bandsaw
1) Shall be a commercial off the shelf (COTS) item.
2) Shall have a maximum power requirement of 208V/30A/3-phase.
3) Shall have variable cutting speeds capable of a minimum of Surface Feet Per Minute (SFPM) to a maximum of at least 5,000 SFPM and controls.
4) Throat capacity: at least 20"
5) Cutting Height Capacity: 12”-14”
6) Blade width: 1/8"-1"
7) Table Height from Floor: 38"-46”
8) Footprint maximum: 72” L x 48” W x 84” H
9) Table Tilt (deg.) maximum: At least 10 positive and at least 45 negative.
10) Table size minimum: 14” x 14”
11) Shall include standard miter gauge.
12) Shall include Blade Guard and Tension control device IAW OSHA 1910.213
13) Shall include Work Light
14) Shall include indicator for blade speeds in feet per minute.
15) Shall include Emergency Stop Button, Blade Start Button, and Blade Stop Button
16) Shall include Vacuum for removal of dust.
17) Shall include compatible 60-80 grit Continuous Diamond Edge, or 70-100 grit Continuous Remington Tungsten Carbide Band Saw Blade
18) Shall deliver to Tinker AFB fully assembled with operator’s manual.
A Firm Fixed Price type contract is contemplated.
Estimated Period of Performance: 60 days ARO
This is a small business set-aside
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 332216 with a size standard of 750 EMP.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
For further information contact:
Sheridan Robison
Contracting Officer
Sheridan.robison@us.af.mil
- CP 405 734 9107 3001 STAFF DR STE 2S76
- TINKER AFB , OK 73145-3303
- USA
- Sheridan Robison
- sheridan.robison@us.af.mil
- Feb 14, 2024 01:35 pm CSTPresolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.