Portable Laser Marker
| Agency: | DEPT OF DEFENSE |
|---|---|
| Level of Government: | Federal |
| Category: |
|
| Opps ID: | NBD00159420537966907 |
| Posted Date: | Aug 10, 2023 |
| Due Date: | Aug 11, 2023 |
| Solicitation No: | FA8125-23-Q-0091 |
| Source: | https://sam.gov/opp/257c9d5a2f... |
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Presolicitation (Original)
- All Dates/Times are: (UTC-04:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Aug 10, 2023 12:52 pm EDT
- Original Response Date: Aug 11, 2023 10:00 am EDT
- Inactive Policy: 15 days after response date
- Original Inactive Date: Aug 26, 2023
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 3611 - INDUSTRIAL MARKING MACHINES
-
NAICS Code:
- 333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing
-
Place of Performance:
Tinker AFB , OK 73145USA
The Air Force intends to solicit the following supply:
The 76th AMXG/564 is requesting utilization of funds for the purchase of one (1) Portable Laser
Maker.
The requested equipment item description / Specifications are outlined below.
Quantity of One (1) Portable Laser Maker.
Startup:
(1) Five (5) days of Installation and Training at Tinker Air Force Base, OK.
(2) Maintenance kit and instructions shall have a minimum of ten (10) replacement consumables such as belts and filters.
Standards:
(1) Shall comply with direct marking SAE specifications AS5942 or AS5649
(2) Shall comply with BAC 5152
Wire Processing / Handling / Printer
(1) Powered coiling pan.
(2) Knot and splice detection.
(3) Wire size and cut capability – 26 AWG to 6 AWG
(4) Measure and cut capability.
(5) Shall have a minimum speed of 25 meters per minute.
(6) Shall have upper- and lower-case text marking capability on wires.
(7) Table-top unpowered de-reeler.
(8) Wire tension monitoring to ensure wires are not over tensioned when being marked.
Power Requirements
(1) Electrically powered by standard 120VAC 20A.
(2) Device shall not require compressed air to operate.
Site Constraints:
(1) Plug Configuration shall be NEMA 5-15P.
(2) Dimensions: De-reeler and wire marker shall fit within a 65”(L) x 30” (W) x 40” (H)
Space.
Control:
(1) User control screen built into device.
(2) User control interface must be touchscreen.
A Firm Fixed Price type contract is contemplated.
Estimated Period of Performance: 30 days ARO
This is a small business set-aside
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 333914with a size standard of 750 EMP.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
For further information contact:
Sheridan Robison
Contracting Officer
- CP 405 734 9107 3001 STAFF DR STE 2S76
- TINKER AFB , OK 73145-3303
- USA
- Sheridan Robison
- sheridan.robison@us.af.mil
- Aug 10, 2023 12:52 pm EDTPresolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.