Oklahoma Bids > Bid Detail
42--Wildland PPE
| Agency: | DEPT OF DEFENSE |
|---|---|
| Level of Government: | Federal |
| Category: |
|
| Opps ID: | NBD00159917001159074 |
| Posted Date: | Apr 20, 2023 |
| Due Date: | Apr 27, 2023 |
| Solicitation No: | PR-2023-048 |
| Source: | https://sam.gov/opp/73c62f0a34... |
Follow
Active
Contract Opportunity
Notice ID
PR-2023-048
Related Notice
Department/Ind. Agency
DEPT OF DEFENSE
Sub-tier
DEPT OF THE ARMY
Major Command
AMC
Sub Command
ACC
Sub Command 2
MISSION & INSTALLATION CONTRACTING COMMAND
Sub Command 3
419TH CSB
Office
W6QM MICC-FT DRUM
Looking for contract opportunity help?
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Combined Synopsis/Solicitation (Original)
- All Dates/Times are: (UTC-04:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Apr 20, 2023 04:19 pm EDT
- Original Date Offers Due: Apr 27, 2023 11:00 am EDT
- Inactive Policy: Manual
- Original Inactive Date: Oct 24, 2023
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 4210 - FIRE FIGHTING EQUIPMENT
-
NAICS Code:
- 339999 - All Other Miscellaneous Manufacturing
-
Place of Performance:
2025 Adams Road Fort Sill , OK 73503USA
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR-2023-048 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 550.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids.
The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on:
2023-04-27 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.
FOB Destination shall be Fort Sill, OK 73503
The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: FC200-S-32 - Coaxsher, CX Wildland Vent Pant
Size: SMALL
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 002: FC200-S-34 - Coaxsher, CX Wildland Vent Pant
Size: SMALL
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 003: FC200-S-36 - Coaxsher, CX Wildland Vent Pant
Size: SMALL
Inseam: 36
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 004: FC200-M-32 - Coaxsher, CX Wildland Vent Pant
Size: MEDIUM
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 4, EA;
LI 005: FC200-M-34 - Coaxsher, CX Wildland Vent Pant
Size: MEDIUM
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 2, EA;
LI 006: FC200-M-36 - Coaxsher, CX Wildland Vent Pant
Size: MEDIUM
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 007: FC200-L-32 - Coaxsher, CX Wildland Vent Pant
Size: LARGE
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 5, EA;
LI 008: FC200-L-34 - Coaxsher, CX Wildland Vent Pant
Size: LARGE
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 8, EA;
LI 009: FC200-L-36 - Coaxsher, CX Wildland Vent Pant
Size: LARGE
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 4, EA;
LI 010: FC200-XL-32 - Coaxsher, CX Wildland Vent Pant
Size: EXTRA LARGE (XL)
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 5, EA;
LI 011: FC200-XL-36 - Coaxsher, CX Wildland Vent Pant
Size: EXTRA LARGE (XL)
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 2, EA;
LI 012: FC200-2XL-34 - Coaxsher, CX Wildland Vent Pant
Size: TWO EXTRA LARGE (XXL / 2XL)
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 013: FC200-2XL-36 - Coaxsher, CX Wildland Vent Pant
Size: TWO EXTRA LARGE (XXL / 2XL)
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 4, EA;
LI 014: 55000-00-102072-MR - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: MEDIUM
Length: REGULAR
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 3, EA;
LI 015: 55000-00-102072-LL - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: LARGE
Length: LONG
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 6, EA;
LI 016: 55000-00-102072-XLL - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: EXTRA LARGE (XL)
Length: LONG
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 6, EA;
LI 017: 55000-00-102072-3XR - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: THREE EXTRA LARGE (XXXL / 3XL)
Length: REGULAR
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 2, EA;
LI 018: 55000-00-102072-3XL - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: THREE EXTRA LARGE (XXXL / 3XL)
Length: LONG
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 2, EA;
LI 019: HS-2 - Hot shield wildland face protector mask model HS-2
Description: A safety garment for the face. Can be classified as an interface component. Mask is designed with a filter pocket that allows insertion of nearly any type of disposable (N-95) filter. Mask can hang loosely around neck until ready for immediate use. Mask uses hook and loop fasteners to secure around back of neck of wearer. Nighttime visibility with 3M Scotchlite® reflective trim.
KEY FEATURES:
Patented CarbonX materials inside and out
Designed by firefighters for wildland firefighting operations
Moderately easy to breathe through...designed for intermittent use as needed
Filter pocket allows insertion of low-level, N-95 or EN respirator filter with exhalation valve
Very lightweight....only 5.8 oz / 162.4 grams grams
Comfortable and absorbs perspiration
Hangs loose around your neck until you need it (integral CarbonX hang strap)
One size fits all★3M Reflective Trim for nighttime visibility
Wash and dry in any temperature and detergent
HS-2 SPECIFICTIONS
Name: Hot Shield Firefighter Face Mask
Model Number: HS-2
Weight: 5.8oz / 162.4 grams
Wt w/Filter Installed: 6.5oz / 182 grams
Sizing: One size fits all (hook & loop fasteners behind neck)
Main Benefits:1) Extreme thermal protection (radiant heat or direct flame) of major portions of the face and neck. 2) Reduction of inhalation of airborne particulate by means of a screening mesh and use of a disposable filter w/exhalation valve, 25, EA;
LI 020: 225-M - Glove Crafters, Wildland Fire Glove
SIZE: MEDIUM
These wildland fire gloves feature Eversoft® cowhide leather on the palm and back, making them resistant to flame, heat, cut, and puncture hazards; provided in 3.5 oz. to 4.0 oz. weight; These leather fire gloves have been tanned to pass NFPA flame resistance requirement and are treated to stay soft with low water absorbance when wet repeatedly.
WILDLAND FIREFIGHTING GLOVES
Flame, heat, cut, & puncture resistant, cowhide suede leather
Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit Kevlar® wristlet with leather pull patch on palm side
Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions
UL certified to meet or exceed current edition of NFPA 1977 Standard
Gloves are made from all USA manufactured material and produced in the USA with a highly skilled work force., 6, EA;
LI 021: 225-L - Glove Crafters, Wildland Fire Glove
SIZE: LARGE
These wildland fire gloves feature Eversoft® cowhide leather on the palm and back, making them resistant to flame, heat, cut, and puncture hazards; provided in 3.5 oz. to 4.0 oz. weight; These leather fire gloves have been tanned to pass NFPA flame resistance requirement and are treated to stay soft with low water absorbance when wet repeatedly.
WILDLAND FIREFIGHTING GLOVES
Flame, heat, cut, & puncture resistant, cowhide suede leather
Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit Kevlar® wristlet with leather pull patch on palm side
Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions
UL certified to meet or exceed current edition of NFPA 1977 Standard
Gloves are made from all USA manufactured material and produced in the USA with a highly skilled work force., 12, EA;
LI 022: 225-XL - Glove Crafters, Wildland Fire Glove
SIZE: EXTRA LARGE (XL)
These wildland fire gloves feature Eversoft® cowhide leather on the palm and back, making them resistant to flame, heat, cut, and puncture hazards; provided in 3.5 oz. to 4.0 oz. weight; These leather fire gloves have been tanned to pass NFPA flame resistance requirement and are treated to stay soft with low water absorbance when wet repeatedly.
WILDLAND FIREFIGHTING GLOVES
Flame, heat, cut, & puncture resistant, cowhide suede leather
Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit Kevlar® wristlet with leather pull patch on palm side
Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions
UL certified to meet or exceed current edition of NFPA 1977 Standard
Gloves are made from all USA manufactured material and produced in the USA with a highly skilled work force., 12, EA;
LI 023: FH911-HR-ORANGE - Bullard, FH911-HR Wildland Fire Helmet
Color: Orange
FH911 Bullard full brim wildland helmets are specifically engineered to meet the special needs of wildland/forestry firefighters. Manufactured from heat-resistant thermoplastic for superior impact and penetration protection, these Bullard fire helmets meet and exceed the performance specifications of NFPA 1977-2005. Each full brim wildland helmet also exceeds all major state fire codes for wildland firefighting.
SPECS:
Easy to adjust Flex-Gear® ratchet sizing suspension
Durable and comfortable leather ratchet cover included and is replaceable in case of damage.
High-heat thermoplastic outer shell A specially formulated advanced color-through thermoplastic shell with the ultimate in impact and penetration resistance.
Scotchlite reflective markings Highest quality reflective material available; retains reflectivity to 500º F (260º C). No burning, cracking or peeling.
Three goggle clips keep your goggles in place; no slipping or sliding on the helmet.
Adjustable chinstrap included. Replacements are available and sold separately.
Includes an absorbent cotton brow pad and vertical adjustment capabilities for optimal comfort and fit. Replacement cotton brow pads are sold separately.
Velcro® attachments inside shell
NFPA 1977 Certified ANSI/ISEA Z89.1, Type I, Class E & G Compliant, 6, EA;
Solicitation and Buy Attachments
***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.
The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.
IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance
Shipping is FOB Destination CONUS (CONtinental U.S.).
New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.
Submitted Quotes will be valid for 45 days after the auction closing.
This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).
IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/
The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf
5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.
Headquarters U.S. Army Materiel Command
Office of Command Counsel-Deputy Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil
The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.
"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"
Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.
Wide Area WorkFlow Payment Instructions
252.204-7012 Safeguarding of Unclassified Controlled Technical Information
All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.
IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable.
No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.
Wide Area WorkFlow Payment Instructions
Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582.
In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****
Reporting During Contract Performance
Equal Opportunity
The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on:
2023-04-27 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.
FOB Destination shall be Fort Sill, OK 73503
The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: FC200-S-32 - Coaxsher, CX Wildland Vent Pant
Size: SMALL
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 002: FC200-S-34 - Coaxsher, CX Wildland Vent Pant
Size: SMALL
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 003: FC200-S-36 - Coaxsher, CX Wildland Vent Pant
Size: SMALL
Inseam: 36
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 004: FC200-M-32 - Coaxsher, CX Wildland Vent Pant
Size: MEDIUM
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 4, EA;
LI 005: FC200-M-34 - Coaxsher, CX Wildland Vent Pant
Size: MEDIUM
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 2, EA;
LI 006: FC200-M-36 - Coaxsher, CX Wildland Vent Pant
Size: MEDIUM
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 007: FC200-L-32 - Coaxsher, CX Wildland Vent Pant
Size: LARGE
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 5, EA;
LI 008: FC200-L-34 - Coaxsher, CX Wildland Vent Pant
Size: LARGE
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 8, EA;
LI 009: FC200-L-36 - Coaxsher, CX Wildland Vent Pant
Size: LARGE
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 4, EA;
LI 010: FC200-XL-32 - Coaxsher, CX Wildland Vent Pant
Size: EXTRA LARGE (XL)
Inseam: 32"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 5, EA;
LI 011: FC200-XL-36 - Coaxsher, CX Wildland Vent Pant
Size: EXTRA LARGE (XL)
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 2, EA;
LI 012: FC200-2XL-34 - Coaxsher, CX Wildland Vent Pant
Size: TWO EXTRA LARGE (XXL / 2XL)
Inseam: 34"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 1, EA;
LI 013: FC200-2XL-36 - Coaxsher, CX Wildland Vent Pant
Size: TWO EXTRA LARGE (XXL / 2XL)
Inseam: 36"
Nomex Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1).
Breathable: “XVent” design provides air flow keeping your body cool.
Comfortable: Seamless crotch design minimizes chafing
Fit & Mobility: Articulated areas along with an aggressive cut provide excellent fit and mobility
Durable: Double reinforced in high-stress areas to take the abuse
Features:
Patent Pending “XVent” Technology makes these pants the “coolest” period.
Minimize chafing with our new underside pattern design
Articulated areas provide excellent comfort and fit
Aggressively cut for maximum mobility
Double reinforced in high-stress areas to take the abuse
Super tough black oxidized YKK fly zipper assures a long life
Double closure system with Mil-Spec Velcro and melamine button makes a solid closure system which gives redundancy and reliability in the field
Backed by our 100% Guarantee
Material: 6oz NOMEX®
NOMEX® CRAQ-SPUN® Thread
YKK® NOMEX® Zipper Pulls & Tape
Melamine Buttons
Mil-Spec Velcro
Single Needle Tailoring
Certified to Meet the Requirements of CAL/OSHA Regulation 3406 (c) (1)
Dual Compliant Wildland Pant to current NFPA 1977 & 1975 Specifications, 4, EA;
LI 014: 55000-00-102072-MR - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: MEDIUM
Length: REGULAR
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 3, EA;
LI 015: 55000-00-102072-LL - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: LARGE
Length: LONG
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 6, EA;
LI 016: 55000-00-102072-XLL - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: EXTRA LARGE (XL)
Length: LONG
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 6, EA;
LI 017: 55000-00-102072-3XR - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: THREE EXTRA LARGE (XXXL / 3XL)
Length: REGULAR
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 2, EA;
LI 018: 55000-00-102072-3XL - PGI Inc. , Smokechaser (DELUXE) Field Coat
Material: Nomex - 6 oz. Nomex IIIA plain weave is a blend of 93% Nomex, 5% Kevlar, and 2% Anti-Stat. This is a lightweight inherently FR fabric that has stood the test of time in the fire service industry. This fabric meets or exceeds NFPA 1977 standards for Wildland Firefighting.
Color: Yellow
Size: THREE EXTRA LARGE (XXXL / 3XL)
Length: LONG
FEATURES & BENEFITS
• Four inch high Alpine style collar can be worn folded down to allow venting or zipped up to completely cover neck providing additional protection from heat and flame. Unlike conventional Wildland coats no bulky throat strap and closure system required. Hanger loop at neck.
• Seamless shoulders eliminate bulky seams and allow maximum mobility while reducing wear and seam pressure under weight of a pack harness.
• Double pull Zytel FR50 Delrin zipper with Nomex tape is covered by storm-flap with intermittent hook/loop closures.
• Radio pocket with hook/loop flap closure and microphone holder loop is set above the pocket flap.
• Cell phone pocket with hook and loop flap closure on right chest (not shown) and D-ring at bottom for hanging gloves or gear.
• Radial sleeve design allows full arm movement and assures “no hike” fit when arms are raised over shoulders.
• Articulated elbows promote freedom of movement as well as a more contoured fit.
• Adjustable cuffs incorporate hook/loop tab closure for easy adjustment even when wearing gloves. Partially elasticized wrist allows cuff to be tightly secured without impeding circulation or movement.
• Gusset at cuff has secondary hook/loop strip allowing cuff to be opened to its fullest extent for maximum ventilation or to allow glove cuff to be tucked inside.
• Large cargo hip pockets with hook/loop flap closures expand for extra storage capacity and have built-in hand warmer compartments. Right cargo pocket has ¾” wide nickel-plated swivel snap hook attached to 6” self-fabric strap. Snap hook sewn to inside of pocket. Strap allows it to be pulled out for easy accessibility. Perfect for securing key rings or other valuables.
• 3M™ Scotchlite™ Flame Resistant Retro Reflective Lime/Yellow two inch wide Triple Trim sewn around arms, bottom and across shoulders in back.
• U.L. Classified to meet or exceed NFPA 1977 standard on Protective Clothing and Equipment for Wildland Fire Fighting (Current Edition). Requirements for Cal-OSHA Title 8 GISO Sections 3406 (c)(1) and/or 3410(d)(1)., 2, EA;
LI 019: HS-2 - Hot shield wildland face protector mask model HS-2
Description: A safety garment for the face. Can be classified as an interface component. Mask is designed with a filter pocket that allows insertion of nearly any type of disposable (N-95) filter. Mask can hang loosely around neck until ready for immediate use. Mask uses hook and loop fasteners to secure around back of neck of wearer. Nighttime visibility with 3M Scotchlite® reflective trim.
KEY FEATURES:
Patented CarbonX materials inside and out
Designed by firefighters for wildland firefighting operations
Moderately easy to breathe through...designed for intermittent use as needed
Filter pocket allows insertion of low-level, N-95 or EN respirator filter with exhalation valve
Very lightweight....only 5.8 oz / 162.4 grams grams
Comfortable and absorbs perspiration
Hangs loose around your neck until you need it (integral CarbonX hang strap)
One size fits all★3M Reflective Trim for nighttime visibility
Wash and dry in any temperature and detergent
HS-2 SPECIFICTIONS
Name: Hot Shield Firefighter Face Mask
Model Number: HS-2
Weight: 5.8oz / 162.4 grams
Wt w/Filter Installed: 6.5oz / 182 grams
Sizing: One size fits all (hook & loop fasteners behind neck)
Main Benefits:1) Extreme thermal protection (radiant heat or direct flame) of major portions of the face and neck. 2) Reduction of inhalation of airborne particulate by means of a screening mesh and use of a disposable filter w/exhalation valve, 25, EA;
LI 020: 225-M - Glove Crafters, Wildland Fire Glove
SIZE: MEDIUM
These wildland fire gloves feature Eversoft® cowhide leather on the palm and back, making them resistant to flame, heat, cut, and puncture hazards; provided in 3.5 oz. to 4.0 oz. weight; These leather fire gloves have been tanned to pass NFPA flame resistance requirement and are treated to stay soft with low water absorbance when wet repeatedly.
WILDLAND FIREFIGHTING GLOVES
Flame, heat, cut, & puncture resistant, cowhide suede leather
Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit Kevlar® wristlet with leather pull patch on palm side
Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions
UL certified to meet or exceed current edition of NFPA 1977 Standard
Gloves are made from all USA manufactured material and produced in the USA with a highly skilled work force., 6, EA;
LI 021: 225-L - Glove Crafters, Wildland Fire Glove
SIZE: LARGE
These wildland fire gloves feature Eversoft® cowhide leather on the palm and back, making them resistant to flame, heat, cut, and puncture hazards; provided in 3.5 oz. to 4.0 oz. weight; These leather fire gloves have been tanned to pass NFPA flame resistance requirement and are treated to stay soft with low water absorbance when wet repeatedly.
WILDLAND FIREFIGHTING GLOVES
Flame, heat, cut, & puncture resistant, cowhide suede leather
Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit Kevlar® wristlet with leather pull patch on palm side
Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions
UL certified to meet or exceed current edition of NFPA 1977 Standard
Gloves are made from all USA manufactured material and produced in the USA with a highly skilled work force., 12, EA;
LI 022: 225-XL - Glove Crafters, Wildland Fire Glove
SIZE: EXTRA LARGE (XL)
These wildland fire gloves feature Eversoft® cowhide leather on the palm and back, making them resistant to flame, heat, cut, and puncture hazards; provided in 3.5 oz. to 4.0 oz. weight; These leather fire gloves have been tanned to pass NFPA flame resistance requirement and are treated to stay soft with low water absorbance when wet repeatedly.
WILDLAND FIREFIGHTING GLOVES
Flame, heat, cut, & puncture resistant, cowhide suede leather
Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit Kevlar® wristlet with leather pull patch on palm side
Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions
UL certified to meet or exceed current edition of NFPA 1977 Standard
Gloves are made from all USA manufactured material and produced in the USA with a highly skilled work force., 12, EA;
LI 023: FH911-HR-ORANGE - Bullard, FH911-HR Wildland Fire Helmet
Color: Orange
FH911 Bullard full brim wildland helmets are specifically engineered to meet the special needs of wildland/forestry firefighters. Manufactured from heat-resistant thermoplastic for superior impact and penetration protection, these Bullard fire helmets meet and exceed the performance specifications of NFPA 1977-2005. Each full brim wildland helmet also exceeds all major state fire codes for wildland firefighting.
SPECS:
Easy to adjust Flex-Gear® ratchet sizing suspension
Durable and comfortable leather ratchet cover included and is replaceable in case of damage.
High-heat thermoplastic outer shell A specially formulated advanced color-through thermoplastic shell with the ultimate in impact and penetration resistance.
Scotchlite reflective markings Highest quality reflective material available; retains reflectivity to 500º F (260º C). No burning, cracking or peeling.
Three goggle clips keep your goggles in place; no slipping or sliding on the helmet.
Adjustable chinstrap included. Replacements are available and sold separately.
Includes an absorbent cotton brow pad and vertical adjustment capabilities for optimal comfort and fit. Replacement cotton brow pads are sold separately.
Velcro® attachments inside shell
NFPA 1977 Certified ANSI/ISEA Z89.1, Type I, Class E & G Compliant, 6, EA;
Solicitation and Buy Attachments
***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.
The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.
IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance
Shipping is FOB Destination CONUS (CONtinental U.S.).
New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.
Submitted Quotes will be valid for 45 days after the auction closing.
This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).
IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/
The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf
5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.
Headquarters U.S. Army Materiel Command
Office of Command Counsel-Deputy Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil
The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.
"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"
Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.
Wide Area WorkFlow Payment Instructions
252.204-7012 Safeguarding of Unclassified Controlled Technical Information
All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.
IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable.
No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.
Wide Area WorkFlow Payment Instructions
Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582.
In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****
Reporting During Contract Performance
Equal Opportunity
Attachments/Links
Contracting Office Address
- KO DIRECTORATE OF CONTRACTIN 45 WEST STREET
- FORT DRUM , NY 13602-5220
- USA
Primary Point of Contact
- Name: Marketplace Support
- MarketplaceSupport@unisonglobal.com
- Phone Number Phone: 1.877.933.3243
Secondary Point of Contact
- Apr 20, 2023 04:19 pm EDTCombined Synopsis/Solicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.